A:Hello, after you get the device, please tell me the serial number, and the token will be added to you, and you can check in VZperformance

A:Yes, the pcmtuner is in stock now, we have it in UK/EU/US warehouse

A:The pcmtuner need work with Fetrotech Tool to support MG1 MD1

A:The pcmtuner can support that ecu

A:Hello, yes, the pcmtuner can support it

A:Hello, the pcmtuner support it

A:Yes, the pcmtuner can support it

A:Hello, yes, the pcmtuner can do it

A:You can check the solution here: https://www.youtube.com/watch?v=tZxQO6MRbDk
you must installe pcmtuner 127.
and you have error ( object referance.....)
uninstalle edge web view. and installe old version in link mega.
pleas like and subscribe to cannal.
good Luke.
https://mega.nz/file/pw5jlITC#eh_9qxgoIxkl7KUlonJliCdCcFpO2qveCw2Oqbyt6Mw

A:It’s a problem with windows last update.

Solution 1:
Try restore windows. Your windows done an update, try do roll back to previous.

Solution 2:
If don’t work install your PC with system update no more than 2019.
Solution 3: Customer solution.
No restoration!!! No any reinstall.
Go to Control Panel->Programs and feature
Find Microsoft Edge WebView2 Runtime
Uninstall Microsoft Edge WebView2 Runtime
Disconnect internet
Install the old version edge web view in link mega.
https://mega.nz/file/pw5jlITC#eh_9qxgoIxkl7KUlonJliCdCcFpO2qveCw2Oqbyt6Mw

A:Yes, Mercedes Xentry works no problem with PCMtuner. It works as scanmatik2 and only for Xentry Passthru version.
It is easy to connect. Install J2534 driver.
You can use pcm tuner obd with mercedes xentry software for diagnostic purpose.

We don’t provide xentry free download resources. Search, download and tested by your side.

A:Solution:
It will do this if using some OBD modules if you are not using scanmatik interface, you need to cycle ignition between ID and Write routines
and never while using OBD in car, connect external power to pcmtuner.
It’s an obd module in car, car battery is power source you DONT use a power supply connected to pcm tuner NEVER.

A:Solution:
Not supported in any Module with PCM tuner.
the original pcmflash does not read this ecu yet (only test of the new module), protocol is not activated.
PSA Delphi DCM 6.2 A is supported by OBD and boot+JTAG from Dfox or KT200 Clone.

A:Unsupported Tprot – security updated on ecu
pcmtuner will not read this ecu. Fetrotech tool cannot do it either.

A:Answer:
Must unlock first in bsl before read/write.
BSL unlock it, then OBD read it.

A:Yes. PCMTuner has been tested working with many software programs as a j2534 passthru.
http://www.pcmtuner.org/can-pcmtuner-be-used-as-passthru-j2534-for-odis-xentry/


Acdelco tds (GM Chevrolet online programming), work perfectly with PCM Tuner. using pcmtuner as passthru
Programming new ABS module on a Chevrolet Express 2WD 2013
You pay $45 per Vin good for 2 years on https://www.acdelcotds.com
Connect pcm tuner hardware with vehicle thru OBD socket

A:ACDelco GM from Chevy impala etc NOT with PCMtuner.
PCMTuner will not read ACDELCO E83. You will need MPM programmer.
Mpm tool will read the following E83 ECUs
Astra 1.4
2007 Vectra 2.5, 2.8
2011 Insignia 2.0
2015 Insignia 1.6
Check MPM coverage before operation.

A:Solution:
Your account may not be active yet.
Wait fot 24 to 48 hours in working day to automatically activated it.

A:It is a Yes. You must get the original supplier details from whoever you are purchasing from.
contact the person you bought from, to get seller details, and contact them, but install anyway and complete user registration details etc.

A:lay it down in 29 and lay back in 11
Here is the pcm flash pinout
MEV17.2.1 TC1796