V1.8.8 Xhorse VVDI BIM Tool BIMTool Pro Enhanced Edition Too Support BMW E-sys and Rheingold Diagnostic System
Latest price:US$1,068.00US$929.0013% off- Item No. SK283-B
- Free Shipping
Customer Questions & Answers
Question:
Q:My xhorse vvdi mb tool gave me failed error 3 when during data acquisition procedure. Error image attached. Any solution?
Question:
Q:When install vvdi mb tool software, hook up the unit, install the drivers, and click on the MB tool icon to start the program, but it gives an error code “NetClient.dll was not found”.
Question:
Q:I install the software, hook up the unit, install the drivers, and click on the MB tool icon to start the program, but it gives me an error code “NetClient.dll was not found”.
Answer:
A:Pls delete the software and download it again.
Free download VVDI MB Tool： https://we.tl/t-EEeGgx1dLM (password: 123456)
Free download VVDI MB Tool： https://we.tl/t-EEeGgx1dLM (password: 123456)
Question:
Q:How to solve Xhorse VVDI BIMTool Pro Failed to Test Frequency
Answer:
A:Solution:
Press F, wait 2 seconds press F again followed by an immediate press from the remote, make sure the key is fully flat perpendicular on the blue area.
315Mhz,434Mhz tested fine.
To change the Chinese language, double hold both F and T buttons for 5 seconds, it will change the language to English.
Same as VVDI2.
Press F, wait 2 seconds press F again followed by an immediate press from the remote, make sure the key is fully flat perpendicular on the blue area.
315Mhz,434Mhz tested fine.
To change the Chinese language, double hold both F and T buttons for 5 seconds, it will change the language to English.
Same as VVDI2.
Question:
Q:Xhorse VVDI BIMTOOL Pro cannot test frequency
Answer:
A:It’s suggested to update the firmware to solve the problem.
Method 1: use the Upgrade Kit to update the firmware and try to operate again.
->>Connect Xhorse BIMTOOL Pro with computer via USB cable and install the device driver.
Note: Make sure the computer network connection is normal.
Method 2: free download VVDI BMW Tool V1.6.2 and update firmware via WiFi.
Method 1: use the Upgrade Kit to update the firmware and try to operate again.
->>Connect Xhorse BIMTOOL Pro with computer via USB cable and install the device driver.
Note: Make sure the computer network connection is normal.
Method 2: free download VVDI BMW Tool V1.6.2 and update firmware via WiFi.
Question:
Q:VVDI BIMTool Pro Failed to update using Upgrade Kit V1.7.3
Answer:
A:The solution:
Check if there is a new COM port in [Device Manager].
If not, please try to do as follows:
1.Turn off the anti-virus protection in Windows security
2.Download the BMW Tool software again
3.Change another USB cable to try again.
Check if there is a new COM port in [Device Manager].
If not, please try to do as follows:
1.Turn off the anti-virus protection in Windows security
2.Download the BMW Tool software again
3.Change another USB cable to try again.
Question:
Q:How to use VVDI BIMTOOL Pro with Ethernet port?
Answer:
A:1.Connect VVDI BIMTOOL Pro to computer Ethernet interface via internet cable
And connect to the car or test platform to supply power
2.Open BMW Tool software to check the connection status
3.When connection is normal, it will show “connect 2: OK” and show the corresponding IP address.
And connect to the car or test platform to supply power
2.Open BMW Tool software to check the connection status
3.When connection is normal, it will show “connect 2: OK” and show the corresponding IP address.
Total 23 items, 20 items/p, current page 1/2.
Don't see the answer you're looking for?
Post your question