V1.8.8 Xhorse VVDI BIM Tool BIMTool Pro Enhanced Edition Too Support BMW E-sys and Rheingold Diagnostic System

Product Description

Xhorse VVDI BIM Tool Pro BMW ECU DOIP Programmer

• Ship from US/EU/UK, Fast Delivery, No Tax ! 
• Upgrade Version of VVDI BMW , different firmware.
• Add ethernet port; Support 10/100M programming via the ethernet.
• VVDI BIMTool Pro Language: English, Spanish, Italian, Polish, Germany, Hungarian, Chinese

Note: 

• Works on All Windows computer, like win7, win8, win10, no computer operating system limitation.
• VVDI BIMTool Pro and VVDI BMW Tool use same software, and some functions in the software will prompt you to use bimtool.
• Don't use the Enternet cable and USB cable at the same time. For key programming,use usb cable, coding use Enternet cable.
• When connect VVDIBIM device with PC, it will display"Booting" on little screen, after 20 secs it will display as "BMW", then it is connected OK.

VVDI BIMTool Pro Features

• Support exchange ECU and CAS.
• Support DolP Vehicle/Module Programming
• Support BMW ECU Programming(NBT/CIC）(Being connected via the  network cable)
• Greatly speed up the F/G  Chassis Programming  (Being connected via the  network cable)
• Support directly read ISN data without disassembling  the ECU (N13/N20/N55/N63)
• Support BMW E-sys and  Rheingold Diagnostic System. Be able to replace the specialized devices.(Being connected via the network cable)
• Add ethernet port; Support 10/100M programming via the ethernet. (Will make BMW E/F/G programming and coding faster)

Xhorse VVDI BIMTool Pro released new software V1.8.8 Information

Xhorse VVDI BIMTool Pro software update to V1.8.8 on June 15th, 2023.
2023-06-15
Require firmware V1.8.4
===== BMW V1.8.8 =====
1. Improvement the internet connection
2. Bugfix

Free download VVDI BIMTool software V1.8.8
http://dl.xhorse.com/product/bmwtool/software/BMWTOOL-InstallerV188.exe

Functions of VVDI BIM Tool

• OBD Key Learn: Support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.
• File Key Making: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+,etc. As for CAS1/ CAS2/ CAS3/ CAS3+ system, support reading EEPROM and synchronous code data.
• Support FEM/ BDC System Generating Key, Replacing FEM/ BDC Control Units, Reset Mileage.
• Mileage Correction: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+ odometer correction.

1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code

2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whold database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code

3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key inforamtion
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key

4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file

5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key

6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key

7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information

8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc

9. Read E-Series/F-Series ECU ISN via OBDII
1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU

10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump

11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)

12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version

13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)

14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer

15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG

Xhorse VVDI BIM PRO VS VVDI BMW  VS VVDI2 BMW:

	VVDI BIM PRO	VVDI BMW	VVDI2 BMW
Image	Blue	Blue	Yellow
Functions	Locksmith,programming,coding	Locksmith,programming,coding	Locksmith
Update	Software Online for free Firmware use "update kit" update for free	Software Online for free Firmware use "update kit" update for free	Software Online for free Firmware use "update kit" update for free
Support System	EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM/ BDC system	EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM / BDC system	EWS to CAS (1, 2, 3, 3++ 4, 4+)
Programming Funtion	Support Can and DOIP	Support Can	/

Xhorse VVDIBIM PRO vs VVDI BMW

Item	VVDI BIMTOOL Pro	VVDI BMW TOOL
IMG
Remark	In stock	Out of stock
Language	Chinese, English,   Italian, Spanish, German, Hungarian,  Polish	Chinese, English, Italian, Spanish,  German, Hungarian, Polish
Program E/F chassis	Yes	Yes
Code E/F chassis	Yes	Yes
Learn OBD key	Yes for CAS1 / CAS2 / CAS3 / CAS3+ / CAS3+ ISTAP / CAS4 / CAS4+	Yes for CAS1 CAS2 CAS3 CAS3+  CAS3+ISTAP CAS4 CAS4+
File make key	Yes for CAS1 CAS2 CAS3 CAS3+  ISTAP CAS4 CAS4+, etc.	Yes for CAS1 CAS2 CAS3 CAS3+  ISTAP CAS4 CAS4+, etc.
Gnerate key for FEM/BDC system	Yes	Yes
Correct mileage	Yes for CAS1 CAS2 CAS3 CAS3+ ISTAP CAS4 CAS4+ and FEM / BDC system	Yes for CAS1 CAS2 CAS3 CAS3+  ISTAP CAS4 CAS4+ and FEM/BDC system
Read EEPROM & synchronous code data	Yes for CAS1 CAS2 CAS3 CAS3+	Yes For CAS1 CAS2 CAS3 CAS3+
Get ECU ISN	Yes	Yes
Support synchronous ECU and CAS,  synchronous ELV and CAS	Yes	Yes
Reset 8HP gearbox in F chassis	Yes	Yes
Exchange ECU and CAS	Yes	Yes
Add ethernet port	Yes, support 10/100M programming via Ethernet	No
WiFi	NO	No
DoIP Vehicle/Module Programming	Yes	No
BMW ECU programming (NBT/CIC)	Yes,  connect via network cable	No
Speed up the F/G Chassis programming	Yes, connect via network cable	No
BMW E-sys and Rheingold Diagnostic System	Yes,  able to replace the specialized devices (connect via network cable)	No
Read N13/N20/N55/N63 ISN data without disassembling	Yes	No

Package includes:
1pc * VVDI BIMTool Pro Main Unit
1pc * OBD Cable
1pc * Ethernet Cable
1pc * USB Cable
1pc * ECU Reflash Cable
1pc * Plastic Box

• Whatsapp: +8618054815707
• Email: sales@EOBD2shop.com
• Hot line: +8618054815707
• Skype: careucar

EOBD2shop OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.