EF SCANNER II Full Version for BMW  E-series CAS1, CAS2, CAS3, CAS3+ Support Diagnosis, IMMO, Mileage Correction, Coding

Product Description

• Supported 166 types of ECU 
• Support FEM/BDC keyprog module
• Software version: BMW Explorer V2018.12, Language: English
• Work For E-series CAS1, CAS2, CAS3, CAS3+  mileage Reset  
• Special Features: Full Diagnostic Functions Also Support BMW IMMO, Mileage Correction, Coding

• Install software by CD, Win 7 is recommended.
• How to install BMW EF SCANNER Software: Click Here
• Please don't connect to the internet while using, otherwise your BMW E/F SCANNER will be locked!
• All the function on software is activated ready, and can directly to use it. No need to pay extra fee to open the software anthorization.

• Connect with PC to do key programmer function
• It can only do mileage correction for cas module and fem module, can not correct mileage on dashboard chip
• Must let laptop go to Standby mode. as programming need take long, sometimes, it will take about more than 30 minutes to read isn number. If your laptop go to Standby mode, you will fail to finish programming and other function, it also will damage control module on your car
• You need connect your car to stable power supply, specially when coding isn, must connect to Programming Power Supply. If the power supply problem lead you fail to finish programming, it will damage control module on your car

• Basic features module
• E-series Coding module
• E-series keyprog module
• FEM/BDC mileage module
• F-series mileage correction module
• FLASH calibration READ/WRITE calibrations for F and G series models
• ISN reset for F-series HP8 gearbox
• FEM/BDC keyprog module
• ISN MSx8x (SIEMENS) for BMW
• F-Coding module
• Tricore module for BMW
• CAS4 CAS4+ F-series keyprog module with F-ISN

• Base complete set-diagnostics, Reading and clearing(erasing) DTC, Edit AIF
• Reset odometer, maintenance interval adjustment +  Coding
• CAS1 CAS2 CAS3 CAS3+ , Rolls-Royce – Reading, writing Key
• ISN.Reading ISN MS45, MSV70, ME9E65_6, ME9N62, MEV9N46L, N62_TUE, N62_TUE2, N73L, N73R, ME9N45 , DDE604, DDE626,D60PSA0
• Reading module ISN  EGS  (GS19D)  via OBD
• Reading module ISN MSD80 MSD81 MSD802 MSD812 MSD851 MSV80  MSV801  via OBD 
• Moduke read ISN ME17N45 ( N45 Tricore) via OBD
• Reading module ISN MEV17_2 ( N12 Tricore) via OBD
• Reading module ISN MED17_2 ( N14 Tricore) via OBD
• Reading module ISN MV1722 ( N16 Tricore) via OBD
• Reading module ISN MVD1722 ( N18 Tricore) via OBD
• Reading module ISN MEV17N46 ( N46 Tricore) via OBD
• Reading module ISN and Eeprom D7xN47xx ( N47 Tricore) via OBD
• Reading module ISN and Eeprom D7xN57xx ( N57 Tricore) via OBD
• Read / write module ISN MEVD176K  ( N55 Tricore) via OBD
• Reading module ISN MSS60 (  S65 Ex Seria) via OBD
• Read / write module ISN MVD1727  (  N18 Mini ) via OBD
• Fxx Seria
• Module reset EWS option EGS 8HP (F and G seria )
• Module Read/Write Calibrations MDG1  (F and G seria )
• Module reset mileage FEM/BDC (F seria 
• Mileage reset and service interval modification for F-series. 
• Fxx Seria Coding
• Module Write keys FEM/BDC (F seria) 
• Module write key (F-series ) and  Read / write module ISN MEVD172Y ( N55 ) 
• Read / write module MEVD1725 ( N13 ) 
• Read / write module MEVD1724 ( N20 )
• Read / write module S63TU ( S63TU )

BMW E/F Scanner Customers Reviews:

Review 1:

Okay, so I received tool 2 days ago, tested so far with E61 and F10 2013, in terms of km reset, codings its all like original, it fails in ISN reading on F series as this fields are blanked off, id read isn from edc16c35 short one fine, sometime it drop dongle errors, but overall tool is worth spending that sum of money, just to do coding E/F series and km resets on its own, i would not risk to do FEM/CAS key. Will try and update my post in a week or so about keys, as might have a go on mine just for feedback, I compared all functions to my genuine interface which is basic plus few licenses not full like the clone one.

Review 2:
I received tool 2 days ago, tested so far with E61 and F10 2013, in terms of km reset, codings its all like original, it fails in ISN reading on F series as this fields are blanked off, id read isn from edc16c35 short one fine, sometime it drop dongle errors, but overall tool is worth spending that sum of money, just to do coding E/F series and km resets on its own, i would not risk to do FEM/CAS key. Will try and update my post in a week or so about keys, as might have a go on mine just for feedback, I compared all functions to my genuine interface which is basic plus few licenses not full like the clone one.

Review 3:
I have done quite a lot of cas 2, 3, 3+ 3+ downgraded and then restored to ori no problem, please always use battery support, all these bad reviews and cries for flash are caused by brave people trying to flash them without stable voltage, there is cas flash no on the top of the window, which you can note just in case some problems occur, then you can find for the right flash fine even if it was updated by ista/p in the past.

Review 4:
Tested cas3 2007 other tools could not reset km by obd, very pleased with it! DME km by obd ok F25 and E90 tested, shadow km's resetted. I think I even trust this with FEM (reset km).

Review 5:
My clone shows 24 times in licenses and sometimes after work it goes down to 22 but after restart program the counter refreshed to 24  On my F01 km reset in DDE don't work (FZD and JBBF works without issues) but I read in explorer manual that original tool has also a success rate from 50 percent on f Series. Overall its worth the money I think  E71 2010 Long ISN read (DDE) success, I can't test more vehicles until now

Review 6:
BMW E/F Scanner Test Report:
with mini med17.2 isn read ok, write in cas only old ista version... ok
tested so far with E61 and F10 2013, in terms of km reset, codings its all like original
ISN Reset (only reset, no reading) from the 6HP Gearbox in the X6 50i was successful.

Review 7:
"Dongle not found" --> go to setup and it will find it. 
On my one laptop it doesnt work on one usb3.0 and another works good.

Review 8:
Tested so far with E61 and F10 2013, in terms of km reset, codings its all like original, it fails in ISN reading on F series as this fields are blanked off, id read isn from edc16c35 short one fine, sometime it drop dongle errors, but overall tool is worth spending that sum of money, just to do coding E/F series and km resets on its own, i would not risk to do FEM/CAS key.

Packing List:

• Software version: BMW Explorer 0.18.12.03
• 1pc x EF SCANNER For BMW Full Version (V2018.12)
• 1pc x USB Cable
• 1pc x CD

• Whatsapp: +8618054815707
• Email: sales@EOBD2shop.com
• Hot line: +8618054815707
• Skype: careucar

• Accepting bulk purchases, We can Offer you wholesale price.
• EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.