Black Friday Sale [BMW Package Module 1 2 3 7] Yanhua Mini ACDP BMW CAS1-CAS4+ FEM/BDC ISN Read Free FRM Programming

Product Description

Yanhua Mini ACDP BMW CAS1-CAS4+/FEM/BDC/ISN Read

• No Need Soldering.
• BMW DME ISN Code Read & Write
• Free Gift: Module 7 BMW Key Renew Module.
• Support CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+FEM/BDC Key Programming, mileage reset, program recovery.

Highlights

• No need to remove the chip
• No need for soldering
• No need to cut the line
• No need to lift the pin
• Connects with your iPhone / Android / or PC
• EEPROM function+ CAS1-CAS3+ CAS4+ FEM/BDC+ ISN read+ FRM Programming Function
• With Free Gift:  BMW Key Renew Module for BMW E Series and F Series( Module 7)

What you can do by this ACDP set?

1. Supports 93 /24/ 25 / 35/ 95 Series EEPROM in-circuit programming
2. (ICP) and on adapter board programming (OBP)
3. Parts of Freescale / NEC MCU in circuit programming（ICP)
4. Supports CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
5. Supports CAS4/CAS4+ IMMO key programming in-circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data. 
6. Supports FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
7. Read/write N20/N55/N13 ISN code via OBD.
8. Read/write MSV80/MSD85 ISN code without opening DME shell.
9. Read/write other DME ISN code by opening DME shell

More Details of the functions

CAS1-CAS3+ Module:
Key Programming by OBD
Read CAS EEPROM
Add Keys
Reset Mileage
Back up or recover CAS
All keys Lost 

CAS4/CAS4+ Module:
Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Mileage without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding 

FEM/BDC Module :
All keys lost without soldering/welding
Add keys without soldering/welding
Delete Keys without soldering/welding
Enable/Disable keys without soldering/welding
Read Key ID
Repair/Replace FEM Module without soldering/welding
Reset Mileage without soldering/welding 

Read and Write ISN Code: 
N20(MEVD1724, MEVD172P, MEVD1729), N13(MEVD1725, ), N55(MEVD172, MEVD1726, MEVD172G, MEVD172S, MEVD17, ), MSV80, MSD81, MS085, MSD85HY, MSD87, MSV90, MEVD1728(s63), MEV1722, MED172, MEVD1727, DDE701,DC17C50, BMSX...

What's New on ACDP Android APP?
Online checking vehicle details (Engine, Gearbox, IMMO System info) by VIN!! Just upload the VIN picture on the system, it will identify the VIN directly!!
Help you confirm the BMW IMMO is BMW CAS or FEM when you only know the car model and year. 
If all keys lost, it requires to read out the engine ISN code, but you don't know the ECU model, this software will help.
For example, when you have no idea whether Mini ACDP can program key on BMW 5 series 2017 or not, which module to order, then youo can ask for the VIN to check the BMW information before making the decision.

What's New on ACDP MODULE 1?

• adds BMW CAS3, CAS3+, CAS3++ DME ISN read/write (replace DME) (2021-03-18)
• adds OBD read/write BMW CAS4 / CAS4+ IMMO programming and odometer correction  (2019-11-015)
• Enables / disable E Chassis CAS1- CAS2 CAS3 keys via OBD (2019-11-06)
• adds BMW CAS4/CAS4+ 9s12xdp512 / 9s12xep100 fast mode of OBD read / write (2019-09-09) 
• adds BMW CAS1 to CAS4 data renew function (2019-03-09)

YANHUA Mini ACDP BMW CAS1-CAS4+ FEM/BDC Supported List

Packing List :
1pc x ACDP Programmer Master
1pc x OBP+ICP adapter
1pc x Puncture socket
1pc x P8P ribbon cable
1pc x 8P cable
1pc x 20P cable
1pc x 12V power adapter 
3pcs x paint surface cleaning needles (1.0mm,0.8mm,0.5mm)
1pc x BAV Key Adapter 
1pc x BDM01 adapter
1pc x BMW- CAS3 board
1pc x BMW- CAS4 board
1pc x CAS3 firmware package
1pc x FEM bridge
1pc x BDC bridge
1pc x Desktop OBD transfer board
1pc x BMW FEM/BDC test platform
1pc x Single-pin double-head cable
1pc x FEM bridge firmware package
1pc x BDC bridge firmware package
1pc x BMW-N13 port board
1pc x N20 caliper for opening the hole of shell
1pc x N13 firmware
1pc x BAV- KEY adapter
1pc x BDM01 adapter
1pc x BMW- CAS3 board
1pc x BMW- CAS4 board
1pc x BMW CAS2 CAS3 CAS4 board Yanahua ACDP BMW Package vs CGDI BMW vs VVDI2 BMW

Product Name	Mini ACDP BMW	CGDI BMW	Xhorse VVDI2 BMW
BMW CAS1-CAS3 Key Programming	Yes	Yes	Yes
BMW CAS4-CAS4+ Key Programming	Yes, No need Soldering	Yes, need Soldering	Yes, need Soldering
BMW FEM/EDC Key Programming	Yes, No need Soldering	Yes, need Soldering	Yes, need Soldering
BMW DME ISN Code Read & Write	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
BMW 35080 35160DO WT EEPROM Read & Write	Yes, need to buy Module 2	Yes, need to buy authorization, and need soldering	Yes, need Soldering
Refresh BMW Keys	Yes, need to buy Module 2	Yes, need to buy authorization, and need soldering	Yes, need Soldering
Free FRM Programming	Yes, need to buy Module 2	Yes, need to buy authorization, and need soldering	Yes, need Soldering
BMW CAS Mileage	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, but need to work with other device

Which one do you recommend for BMW Locksmith & Engineer?

CGDI Prog BMW

Xhorse VVDI BIMTool

Yanhua Mini ACDP

Here is the clue.

CGDI BMW:

Pros:

• BMW CGDI is much easier and has very good Functions, change VIN, change mileage, read ISN from DME etc.
• It can do coding and programming options for used modules.
• Software is simple and easy to use
• It does an excellent job making keys from dump.
• It also can do FEM and BDC but need to have the FEM BDC platform.
• It has CAS Fix function. Make sure you have battery connected to proper power when downgrading. no worries because if something happens to CAS during downgrade, you can use cgdi to fix cas, tried it by disconnecting cable during downgrade, killed CAS, and restored with cgdi.

Cons:

• At the moment is the Data manipulation from dump doesn’t seem to calculate the ISN correctly.
• It’s mostly limited to the older MSD/MSV stuff. It doesn’t support most of the newer MEVD computers
• Downgrade carries some risk (all tools do). If you go to the effort of making a backup before downgrade, you might as well just make the key from dump and skip downgrade altogether.
• FEM bricking also occurs, though generally fixable with e-sys. Recent FEM i-step is said to minimize risk.
• Technical support is average.

Yanhua Mini ACDP

Pros:

• Acdp without question great piece of kit .It does pin check first. You know which points to clean and is very fast and comfortable working.
• Stable work. It is safe to do on bench and doesn’t take much longer.
• It works with Windows App and mobile phone App.
• It is able to renew key, change VIN, mileage, ISN, add key, all keys lost without issue.
• Also an easiest and best solution for FEM. Don’t need to reconnect to the car and run there and back. Just connect tool to FEM, wait for 5-10min and preprocess+key is ready. Done about 20 fem/bdc keys With 100% success rate.
• Doing via eeprom way faster then VVDI with downgrade. CAS4 in 10 minutes.
• Useful for whose soldering skills are not the best
• It has many interface boards, extension modules for gearbox, Volvo, Porsche, Jaguar Land rover etc

Yanhua ACDP Mini works great for CAS2, CAS3, CAS4 and FEM/BDC.  Recommend ICP or bench mode unless making a CAS2 key since only OBD is supported option.  Although it makes keys flawlessly on CAS4 over OBD. But always do CAS4 on bench except OBD CAS 2 is safe all others ICP is safe! There are better tools for OBD. You can also use this tool to read the ISN from DMEs. This all works great with the interface boards!  It works decent for a cheap price!

Cons:

Using just the CAN wires is a hit or miss. (Read ISN from N20 DME with can wires – worked. Read MSD80 with can wires – worked. Read ISN from n55/n20 DME with can wires – didn’t work. Sometimes need interface board. using interface boards works every time!

Xhorse VVDI BIMTool Pro

Pros:

• CAS2/CAS3 can be done by xhorse vvdi bimtool since long time ago, all by obd.
• It can read ISN for DME long time ago
• It has CAS Repair/Recovery Function. Need load eeprom and flash to repair CAS.
• Works perferctly on CAS2/CAS3/CAS4/FEM/BDC
• Have diagnostic+ programming + coding online function
• It got better and made decent improvements
• will allow the tool to use bmw software like icom and get it working much better than the original unit.

Cons:

• Covers only new features more as vvdi2 has (70%).
• WiFi is not stable
• Have to backup flash and eeprom with vvdi prog before test vvdi bimtool
• not cheap

i think every tool has its strengths and weaknesses, i have at200 tool, it is good to read bmw ecu. but other car brand ecu not good.

In sum:

Every tool has its strengths and weaknesses.  Yanhua Mini ACDP is excellent for CAS2/CAS3/CAS4 via ICP on bench, also easiest solution on FEM. But not the best tool for OBD.

CGDI BMW does CAS1-CAS4 and FEM/BDC well, it will also do coding and programming, it is easy to use, but not the best option to read ISN.  VVDI BIMTool is better for OBD, but has bugs need to be fixed.  You need more tools, if one fails, use another.

• Whatsapp: +8618054815707
• Email: sales@EOBD2shop.com
• Hot line: +8618054815707
• Skype: careucar

EOBD2shop OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.