Product Description
FoxFlash is a Full protocol auto, motor, truck, bike, marine, camion ECU and TCU clone and chip tuning programmmer. FoxFlash reads ECU/TCU via OBD, Bench, Jtag and BDM boot mode. Software is free update, no annual fee. Supports auto checksum, VR reading online and provides free damos for chip tuners
FoxFlash Super strong ECU TCU Clone and Chiptuning tool With Free Winols Damos and A2L
- Auto checksum, 5 Years Warranty.
- 100% Original, we are the official seller
- Free update. No subscription, no annual fee.
- Master version, full protocols, VR reading online
- Shipping from US/UK/EU, Fast & No Tax!(worldwide trans )
- Foxflash Manager app can ONLY be installed on up to 6 PCs
- FoxFlash Update: New Add MED17 Series / BMW MSV90 TC1796 / DCM6.2A
- EOBD2shop.com will provide lifetime customer service and tech support.
Promotion:
- Now Buy foxflash Get Free Gifts
1) Toyota/Lexus BDM Jtag Solder for free(Limited)
2) 4pcs Fetrotech Seikotool ECU Cover Extractor
3) Headlamp
4) 2 paris Golve
- Toyota Lexus BDM/JTAG Solder-free Adapter can Works with KT200 and Foxflash,
These adapters help read Toyota denso ecu in BDM/Jtag without soldering.
It is a DIY board with positioning pins, No need soldering, easy and fast to use .
- Free gift Fetrotech seikotool ECU cover extractor is designed for ECU worker and chiptuner. It helps to remove/ install car ECU module cover easily. Fetrotech seikotool ECU cover extractor works perfectly with ECU tunning tools. We need to use four or six at a time based on the type of ECU.
What is foxFlash ?
We’re proud to introduce you to foxFlash®, a new, unique and revolutionary tool for automotive professionals, tuners and engine calibration engineers.
FoxFlash is a powerful solution developed for professional chiptuners, calibratioengineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability,this tool from tuner design ,so you can get many of them support.n
Since the foxFlash® is so much more than just an ECU programming tool, it simply can’t be compared to any traditional flash tool. Despite other tools how good, this is being good tools for read/write operations, we supply many important features, both on the developer side as in daily use. That is why we recommend foxFlash.
What is the Burst Points
- Master version
- Auto checksum
- Online support
- Special functions
- Full protocols open
- Two Years Warranty.
- Excellent technical support.
- Help desk and tuner account
- ECU and TCU connect wires with pdf
- Auto support eeprom and flash checksum
- Free update. No subscription, no annual fee.
- Support BMW MINI BENCH BOOT READ&WRITE.
- FoxFlash Adds BMW MSV90 Boot, DCM6.2A & MED17 Series
- VR read online work (some ecu need use our VR system, tool auto connect to ousr server donload file )
- With the Latest firmware and updates. Use better quality BOM and PCB. More stable, full proof, and reliable.
- Professional Online support, Faster server 1000M/S, No VPN needed. Supports WiFi hotspot
- ECU can be restored to original if your ecu was damage or meet some bad tuning, use our tool can restore to original.
- Tool can online and offline work (some of ecu and functions can offline)
- Support MEDC17 free clone service (most of others tool need patch the files after read out ,but ours is free)
- Support Multi-language: English, Italian,French, Spanish, German, Portuguese, Polish, Czech, Romania, Turkish
- Software can be download on official website: https://www.dfb-technology.com/
- As a ori made tool , we support online
but why we strong use online mode for users
1: we can help you check if your file is correct online .
2: the autochecksum can work online check too.
3: more safe for online
4: online can check if your modfiy if not correct ,so can compare with ours server
5: online can auto VR read and write from ours server , thats mean you can get the ori file no matter if you have any probelm , we can help you recovery your bad work ,or save your bricked ecu.
Note:
- FoxFlash Software Common Errors and Solutions: Check Here
- Send email to info@dfb-technology.com to create an account to download damos files
- FoxFlash ECU TCU Car List, or check driver list on dfb-technology, it is much easier to search than pdf
- Compatible Operating Systems: Windows 7, 8/8.1, 10, 11 64 bits Pro, Recommended Configuration: CPU > 2.5 GHz (Intel i5, i7), RAM > 4GB 64 bits (32 Bit is not supported)
Quick start basics:
1. ensure good internet
2. Device connected and powered (should show in windows device manager)
3. open manager
4. click ACTIVE 4. DO NOT CLOSE MANAGER
5. Open foxflash app.
Note you may need to disable windows automatic time sync feature.
How to use foxFlash Manager and foxFlash software
How to activate foxflash? Click to view >>
FoxFlash ECU Support List, Click to view >>
Support Five Modes and Full System
1. OBD mode: read data from diagnostic port, you need to remove ecu or tcu from car or open the ecu box, just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it
2. BENCH mode: we also call it service mode, you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3. Jtag mode: open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write
4. Boot mode: open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead
5. Full system: you can read and write by pinout for most of ecu and tcu
6. BDM mode: some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it
FoxFlash ECU Programmer Support types:
1. CAR
2. TRUCK
3. MOTORBIKE
4. TRACTOR
5. BOAT
6. Additional TCU package available for Automatic Transmissions.
FoxFlash Main Functions
ECU clone
TCU clone
Chiptuning
Stage1-stage4
Vmax off
Adblue and SCR off
DPF OFF
Flaps OFF
popbangs
gearbox data to adjust LC
sport display
immo off
dpf off
dtc off
GPF/OPF Removal
DPF Removal
EGR Removal
DTC Removal
ADBlue Removal
HOT Start Fix
IMMO Removal
Readiness Calibration
Flaps / Swirl Removal
TVA Removal
Sport Displays Calibration
Cold Start Noise Reduction
Kickdown Deactivation
StartStop Disable
MAF Removal
Speed Limiter Removal
Torque Monitoring Disable
Burbles Activation
Popcorn Activation
EVAP Removal
Exhaust Flap Removal
SAP Removal
AGS Removal
BMS/BPCM
Lambda/O2 Removal
Launch Control
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
Checksum Fix
vmax, swirl off
restoring ECU or TCU factory setting service
VIN fix (EEPROM support checksum, so you can easily change VIN then write back )
FoxFlash Software Update Log
Sept. 14th, 2023
Small update for MED17 checksum fix.
Update checksum for mcu TC1766 TC1793 TC1797 TC1724F TC1767
BMW MINI BENCH BOOT READ&WRITE September 06, 2023
Adds Bosch MEVD17.2.7
BMW Bosch MEVD17.2.7 BENCH BOOT read/write
Citroen Bosch MEVD17.2.7 BENCH BOOT read/write
Mini Bosch MEVD17.2.7 BENCH BOOT read/write
Peugeot Bosch MEVD17.2.7 BENCH BOOT read/write
May 23rd, 2023
Supported Control Units & Vehicles ECU:
Bosch EDC17C83 TC1793
Supported Vehicles:
Isuzu Dmax 2017-2022 1.9D 164cv
Isuzu Dmax Rodeo 2017-2022 1.9D 164cv
Isuzu M21 2017-2022 1.9D 123cv
BENCH read is real.
R/W time: ~6 minutes at first programming, then ~ 30s.
ATTENTION: Some of the latest vehicles might have a secure gateway.
BENCH MODE for complete reading and writing (full backup) TRW EMS2.2 and TRW EMS2.3
FULL READ AND WRITE VIA PINOUT IN BENCH MODE:
- BOSCH EDC7
- BOSCH EDC16
- BOSCH ME9 / MED9
FULL READ AND WRITE VIA PINOUT IN BENCH MODE:
- BOSCH MD1
- BOSCH MG1
- FREESCALE SPC5777
- AURIX TC29x
- ST SPC58
FULL READ AND WRITE VIA PINOUT IN BENCH MODE:
- BOSCH EDC17
- BOSCH MED17 / ME17
- SIEMENS PCR2.1
(Unlocking also possible via pinout)
FULL SYSTEM VIA PINOUT (MICRO/FLASH + EEPROM) OF ECUs:
- BOSCH
- CONTINENTAL
- DELCO
- DENSO
- MARELLI
- SIEMENS
- TEMIC
BDM E JTAG MODES FOR:
- BDM MPC 55x
- BDM MPC 56x
- BDM MC32 / ZC32
- BDM HC12 / S12x
- JTAG NEXUS MPC/SPC 56xx
- JTAG NEXUS MPC 55xx
- JTAG RENESAS
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544
- JTAG NEC 76F00xx
- 76F0038AGD
- 76F0038GD
- 76F0039AGD
- 76F0039GD
- 76F0040GD
- 76F0070
- 76F0085
ADDITIONAL PACKAGE FOR AUTOMATIC TRANSMISSION:
- FULL READ AND WRITE TCU (MICRO+EEPROM)
- TCU CLONING
- TCU CODING FUNCTIONS
How to install And Activate FoxFlash Software
Check Foxflash installation guide below.
Operating system:
Windows 7
Windows 8/8.1
Windows 10
Windows 11
Recommended Configuration:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
64 bits
FoxFlash Installation Guide:
How to use foxFlash Manager and foxFlash software
1 go to
https://www.dfb-technology.com/download.html download foxFlash Manager
app
2install this software on your laptop
3 register this app with your email
4 input your code which tie on your device, don’t spead yours sn to internet, or others guy will try to stolen your tools password
5 connect your foxflash tool to laptop via usb cable then clicke the download button which in foxFlash app inside
After download finish ,pls open the folder C:\Program Files (x86)\FoxFlashManager\foxflash\DFB Technology\DFBTech_DRIVER
Install the drivers
6 disconnect your foxflash tool , then plugin the usb again
7 click the foxflash manager app active button till actived, then run the foxFlashappin your desktop, then input the password at the windows, click login
8:Close your software: click the close button on foxFlash Manager app , then click the foxflash exit button, you totally close ours tool and software .
9: NOTE: always run foxflash manager app each time when you need use ours tool.
Run it then click the active button, it will keep let the tool access ours server . Download just need do at the frist time you don’t have the software.
The please do follows work before starting our foxflash
Ready works
A: Connect your foxFlash with USB cable to laptop
B: laptop or PC must connect to internet
Step 1: go to www.dfb-technology.com website download the software and install the package.
Step 2: Check the SN where tie on your foxFlash box backside
NOTE:
Don’t realase that SN to anyone, its a safe code for you,dont let any third party or guys know that code or it easy let your tools lock.
Step 3: Send that SN to email:info@dfb-technology.com for active and link your tool to your email. (You tool will be lock if you don’t send to active)
Step 4: Input that SN code to you login windows when you run foxFlash main software, it will ask you input that code,then you software and tool will be online
Software Display:
How to connect FoxFlash ECU Programmer
Multiple connection possibilities:
EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC
EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC
BENCH CONNECTION
BDM CONNECTION
JTAG CONNECTION
BOOT MODE CONNECTION
BENCH CONNECTION WITH AUTOMATIC GEARBOX
Package Includes:
Hardware:
1pc x Master machine
1pc x Fox bench box
1pc x USB cable
1pc x Power adapter
1pc x Fox box store over 10 adpaters
1pc x Jtag and bdm cables
1pc x Pen
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box
1pc x Install guide
Software:
1pc x Main software
1pc x Technical Support
1pc x Login account for software and tools
1pc x PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support
1pc x Online chat support for use
Extra pacakge according to users request after the user get the tool.
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L
NOTE: Send your register email to
info@dfb-technology.com to activate your account. Then download free damos files.
Shipment Option and Delivery Time In EOBD2shop
1. Shipment from Shenzhen/ Hongkong warehouse 1)DHL Shipping and Other Express Service:- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
2)Yanwen Express: - Take About 7-10 working days, No Tax Problem
- Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.
3)Normal Registered Airmail Post way- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
2. UK, US, EU Warehouse Shipping: - Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
After-sale service:We can offer you lifetime customer service and tech support. If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement.
For any question, please contact us at: EOBD2shop OBDII tool online supplier- Accepting bulk purchases, We can Offer you wholesale price.
- EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.