A:KM100 can unlock remote but is different from xp400 pro and imkpa kit.

A:It is for multi-brands except for BMW, Volvo and models with 868M/915M frequency.

A:What is the vehicle year pls ?

Please check supported list from this link

https://www.autel.com/vehicle-coverage/coverage2

A:Yes, it can.

A:Create an AUTEL account online, bind the KM100 device to activate, and use the same method as other AUTEL tablet devices.

A:not universal.

A:It supports sub-factory chips, such as xhorse super chip, but can only be generated once on the KM100 device. If you want to use the super chip twice, you need to reset the super chip with the xhorse device.

A:Yes, it will.

A:
2 different tools.
km100 is a key tool, the 508 is a key programmer.
the km100 can generate remotes, chips. and a lot of other things related to keys and remotes.
the km100 has key programming also, not as extensive in coverage as the 508 does thou

A:Yes, you can.

A:
The IM508 has bi direction in it now as well however the km100 is made to be a handheld obd2 autel one key universal key maker etc where the 508 has robust immo eeprom as well etc.
so currently Km100 can do universal keys the 508 can do more with immo and eprom even with the xp200 vs xp400. Km100 is strictly for universal keys via Obd

A:Supports, but if you need dismantling and reading function, KM100 can not support.

A:

You can check the supported list from official website
https://www.autel.com/vehicle-coverage/coverage2

A:Yes, KM100 has no Benz IMMO. Pls check coverage on Autel official website.

A:KM100 comes with built-in simulator function. Does not require APB112.

A:Dead Autel km100 solution. If the battery is fully discharged and cannot be charged and turned on anymore, open km100, disconnect battery and attach power 4.2-4.4v directly to battery terminals + and -. Keep it for 10-15 min. Then assemble all together, connect Charger to usb-c and it will work again. I use Dc power adapter with output 4.2v 500ma.
This must override the battery sense circuit.
Since, the battery is fully discharged, the sensor cannot detect battery presense.

A:Back to “Settings”, and select “VCI manager”.
Connect VCI to device by USB cable.
Switch to “Firmware upgrade” and update firmware if there is one available.
Done.

A:After registration, go to Home page-> Update
Download System Program
After it’s done, device will reboot automatically.
Back to “Update” again, download “KeytoolDiag”.
Then download all immo programs required.

A:Turn on KM100
Accept disclaimer
Go to Settings>>System Settings>>WLAN
Connect Autel KM100 to Wi-Fi.
Back to Homepage, select “Update”.
KM100 says the product has not been registered.
Press Register
If you don’t have an Autel account, register Autel account with email, and password
If have Autel account, login and register KM100 with serial number