SUPER ICOM PRO N3+ N3 Pro BMW Scanner With V2023.09 Software 1TB HDD Support win 10 Replace BMW ICOM Next

Product Description

SUPER ICOM PRO N3+ BMW Full Configuration Plastic Box With V2023.09 Software 1TB HDD 

Package Include: SUPER ICOM PRO N3+ With BMW Plastic Box With V2023.09 Software 1TB HDD

SUPER BMW ICOM PRO N3+ Highlights:

• Supports WiFi and USB connection. 
• N3+=BWM special inspection+J2534+DOIP+WIFI
• J2534 and DOIP are added on the basis of the special inspection. Firmware version: V149, Firmware can be updated online on the original official website
• One code for one machine, and the wireless is bonded with the machine code
• N3+ is developed on the basis of BMW's special inspection device A1, A2, A3 and N3
• N3+ installs a fan and heat sink, which makes the hardware operation more stable and faster
• It is 100% compatible with the original BWM special inspection software without any software changes
• Replace ICOM Next and ENET cable. Fully compatible BMW ICOM ISTA-D, ISTA-P, INPA, WinKFP, E-sys etc engineering software

How to Use SUPER ICOM PRO N3+ Scanner ?

• Difference between BMW ICOM Next And Super ICOM Pro N3+ Super MB Pro N3 Guide Click Here 
• SUPER ICOM PRO N3+ 2 Connection Modes ON WIRED/ WIRELESS Guide Click Here 
• How to set up Super ICOM Pro N3+ as J2534 and DoIP Device: Guide Click Here 
• How to Diagnose 2007 VW Passat With Super ICOM Pro N3+: Guide Click Here
• How to Diagnose 2009 Honda Ballade With Super ICOM Pro N3+: Guide Click Here

Dual Heat Dissipation Design:
The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the BMW special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.

USB and WiFi connection:

Wired USB mode: Wired adopts standard USB3.0 interface. Compared with the old RJ45 network port of the original factory, we have better compatibility and stronger applicability for existing general-purpose computers and tablets. (The first time you need to set the dedicated IP address)

Wireless mode: The latest low-power consumption design is used for wireless mode, which reduces the heat of the product in use and greatly improves the speed and stability of wireless communication. After one wireless connection, it can be automatically connected after booting. (Wireless needs to be wired disconnected.)



Firmware Update Online:
The Super ICOM Pro N3+ adopts the original ICOM solution. The firmware upgrade is synchronized with the original factory and the steps are the same.   If there is an update to the firmware in the future, users can download it from the official website of the original factory and then upgrade. Current firmware version goes to V149. 

Dual Heat Dissipation Design
The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the BMW special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.


 Optimized Main Cable
Because the communication protocol of N3+ includes K line, CAN line and local area network (DOIP) communication, in order to ensure the stability of communication, we have optimized and improved the main cable for testing, which is not an ordinary OBD cable.
 
One-key Switch Button
On the basis of N3, the N3+ adds a one-key switch button, which can be freely switched between BMW ICOM software and DoIP/J2534 software by pressing and holding it for 3 seconds.



Mobile App
Supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool and other mobile apps.


SUPER ICOM PRO N3+ Functions: 
N3+=BWM special inspection+J2534+DOIP+WIFI
 
1. BWM special inspection device(NEXT A3)
N3+ adopts the same technology as BMW's special tester, and its comprehensive performance is much higher than similar products. All BMW's test software can run 100% without any problems, and all test results are 100% consistent with the original factory. The test scope includes BMW cars, motorcycles, Rolls Royce and so on.
 
2. J2534 device
N3+ can use the J2534 protocol to read through after switching with one key. It is compatible with the 6-pin and 14-pin CAN communication and the 7-pin K-line communication of the OBD port. It can use Volkswagen, Mercedes-Benz, Toyota, Honda, Land Rover and other special inspection
software with J2534 interface.

3. DOIP device
N3+ can use DOIP network communication protocol after one-key switching, which can solve the problem that Volkswagen 5054 and Mercedes-Benz C4 cannot test new cars without DOIP.

4. WIFI device
When N3+ uses the BMW special inspection software, it is more convenient and faster to use WIFI, without any configuration on the computer. After one-key switching, WIFI can use BMW's mobile phone hidden functions activation and test software, which can be used to test the DOIP of Mercedes-Benz Volkswagen and the DOIP of Land Rover before 2023.
 

BMW ISTA Software Basic version: 

Software List:
2023.09, Win10 x64 system

ISTA-D 4.43.13
SDP database 4.43.13, Multilingual
VIN: 2023.09
ISTA-P 3.71.0.200, supports BMW motorcycle and electric vehicle programming.
Accessories Inquiry ETK 2019.11
INPA 5.0.6, winkfp 5.3.1, NCS 4.0.1
BMWAi Hidden Functions Activation 4.6
E-SYS pro version 3.35.3, database V71.0,
E-sys PLUS 3.81,
DR.GINI B022
The latest FSC navigation code calculation software and IBAC code calculator

ISTA-D Language: Czech, Dutch, French, German, Greek, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Sweden, Thai, Turkish
ISTA-P Language:  English, Chinese, Czech, Dutch, French, German, Greek, Indonesian, Italian, Japanese, Korean, Polish,
Portuguese, Russian, Spanish, Swedish, Thai, Turkish

BMW ISTA Software Functions:
For BMW diagnostic, coding and programming
Full Comprehensive professional dealer system for all BMW up to 2022. But if you need its ISTA-P software to work for older than 2010 year cars, please leave notes to us, and we will ship older version icom software for you
The full system replace DIS GT1/SSS/OPS and OPPS
No need online account, do all programming and coding offline completely

Package Includes:
1pc x SUPER ICOM PRO N3+ main host
1pc x OBD cable
1pc x USB cable（2 meters long）
1pc x 20-pin round head cable
1pc x 10-pin motorcycle cable
 1pc x  Latest BMW Software 1TB HDD
 
 
 
 
 

• Whatsapp: +8618054815707
• Email: sales@EOBD2shop.com
• Hot line: +8618054815707
• Skype: careucar

EOBD2shop OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.