Ship From US/UK/EU Full Featured 2023 Lonsdor KH100+ Key Remote Programmer with Toyota AKL Online Calculation 1 Year Activation

Lonsdor KH100+ Key Remote Programmer with Toyota AKL Online Calculation 1 Year Activation
 

Lonsdor KH100+ Main Features

• Exclusive support for 8A(H chip) generation. 
• Handy chip holder integrated,902MHZ supported
• Built-in WIFI module, can connect to network at any time
• Built-in super sensor to collect data(over-range data collection).
• Device system comes with operation instructions, easier for you to use. 
• Modern appearance design, in line with the operating habits of the public. 
• Toyota 8A Smart Key Direct copy to Add key(Latest Update)
• Lonsdor KH100+ able to access control key, simulate/ generate chip, generate remote (key), detect remote frequency, detect IMMO, unlock Toyota smart key and etc.

Lonsdor KH100 remote maker chips types Support List

• 11 /12 /13 /33 /42 /46 /48 /4C /60 /61 /62 /63 /64 /65 /66 /67 /68 /69 /6A /6B /70E /71 /72G /8A(Toyota H) 

Note 1:

• 11/12/13: Can be copied to T5/original JMD red super chip/ original JMD king chip  
• 33: Can be copied to T5/ blank 7935 
• 42: Can be copied to blank 7935 
• 46: Can be copied to LKP46/ CN3/ original JMD red super chip/ original JMD king chip 
• 48: Can be copied to Deputy factory 48 
• 4C/60/61/62/63/64/65/66/67/68/69/6A/6B/70E/71/72G: Can be copied to LKP4D/ JMD Red Super Chip(S-JMD) for Handy Baby/original JMD king chip for handy baby 
• 8A (Toyota H) chip: Can be copied to TS21 
•  
• Note 2: 
• Copy function is encrypted by the chip itself, some original car keys only support reading or editing, not copy.
• If the original car key does not support copies, the copy button will not appear in the details page.

Lonsdor KH100+ Function List:

• Identify Copy
• Chip Simulation
• Remote Generation
• Remote Frequency
• Access Control Key
• Chip Generation
• Coil Identification
• Special Function
• 

 

Lonsdor KH100+ Functions:

When complete the registration activation, it enters below menu interface:


Identify Copy
Enter this menu, follow system prompts to operate (as shown).

Access card cloning
Enter this menu, you can identify and copy IC card, and generate garage key as well. Follow the prompts to operate(as shown below).

Simulate Chip
Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.
This device supports below chip types: ①4D ②46 ③48 ④47


Generate Chip
Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.
This device supports below chip types: ①4D ②46 ③48 ④T5 ⑤7935 ⑥8A ⑦4C ⑧Chip conversion

Note: some chip data will be covered and locked.

Generate Remote
Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions.

Generate Smart key(card):
Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions.

Identify Coil:
①Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below).
②Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use key to turn ignition ON. When KH100+ buzzer beeps, it means signal is detected.

Remote Frequency
Enter this menu, put remote control at the device’s induction area to detect remote frequency.

Special function:
Include: detect infrared signal, unlock Toyota smart key, FT Toyota smart key, Charge key, More functions, to be continued...
①Detect infrared signal

   Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100+'s screen is on, it indicates there is infrared signal, otherwise there is no signal(see below pic).

②FT smart key

   For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.

③Unlock Toyota smart key/detect Toyota key status
   Put in the smart key, click OK to operate.

④Charge key
   For a chargeable key with battery, you can perform this function. Put in the key, click [OK] to operate.