Product Description
Launch X431 V is a high cost-effective automotive diagnostic device developed based on Android 9.0 System. It adopts 2.0GHz Quad-core processor, which runs faster and more stable. It is equipped with DBSCar IV connector as standard, which can be directly inserted into the slot of the host connector, easy to use and not easy to be lost. X431 V can cover more than 98% of the car models in the market, realize the fault diagnosis of the whole system, and has many advantages such as strong diagnosis function and accurate test data.
Launch X431 V 8 inch Tablet WiFi/Bluetooth Full System
- Lifetime Tech Support Online
- LAUNCH official authorized dealer
- US/UK/EU Warehouse Shipping, Tax Free with Fast Delivery.
- If your Bluetooth OBD2 connector is broken under the warranty, we will send you new one without any charge.
LAUNCH X431 V V5.0 8" Burst Points:
- Global Version, No IP Limitation.
- Supports 30+ special function and ECU coding
- Support Australian, Indian and Malaysia Car Models
- Full system diagnosis and fast running speed, Reasonable PDA design, easy to carry
- Communicate with vehicle via Wifi and Bluetooth, Bluetooth distance: 10M (without obstacle)
- Based on Android 9.0 System. It adopts 2.0GHz Quad-core processor, which runs faster and more stable.
- 2 Years Free Update Online on LAUNCH Official Website : www.dbscar.com it will cost 350USD/year or 450USDfor 2 years
- It is equipped with DBSCar IV connector as standard, which can be directly inserted into the slot of the host connector, easy to use and not easy to be lost.
- X431 V can cover more than 98% of the car models in the market, realize the fault diagnosis of the whole system, and has many advantages such as strong diagnosis function and accurate test data.
- Vehicle Coverage: Works on all vehicles domestic & import since 1996, up to 72 car brands about 220 car models from European, USA, Asian, Australian also Indian and Malaysia Car Models.
- Multi-Languages: English, German, Japanese, Russian, French, Korea, Arabic, Spanish, Italian, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Persian, Romanian, Serbian, Finnish, Swedish and Czech
Launch X431 V V5.0 Main Fucntions:
- Supports key programming function using with Launch X431 X-PROG 3
- Newly Added Function: For 2017 and later FCA Vehicles with Secure Gateway Module (SGW). This function requires online subscription.
- Support Bi-directional Control & Actuation Test: for example , turning on and off the a/c clutch, fuel pump, purge control solenoid and ect. It is professional DIY automotive tool for mechanic.
- New Designed DBScar Connector: Bigger Bluetooth adapter with LED indicator, Bluetooth distance: 10M (Without Obstacle); Higher quality chip, Long service life; Support repaired, save more money.
- Full System Diagnostic+ Bidirectional Control + Active Test + Key Programming + ECU Coding + + Relearn + Calibration + Adaptation + Matching + Initialization + Remote Diagnosis + Over 200000 Cars supported
- 31 Reset Service Functions : Auto VIN Detect, ECU Coding, Adaptation , Matching ,Key programming, Gear/ SAS /EPB /TPMS /DPF /IMMO /BMS /ETS /Oil /Brake /AFS /EGR /GEARBOX /SUNROOF /SUS Reset, ABS Bleed, Injector coding. Gives you the ability to use dealership level relearn procedures to complete repairs or maintenance
What does Launch x431 v update on 2022?
1. The cpu update from 1.4GHz to 2.0GHz.
2. Wifi update from 2.4GHz to 2.4GHz/5GHz Dual frequency.
3. The camera has 500W pixels on the rear.
4. System update to Android 9.0, it works more smart.
5. 32GB storage capacity + 128GB extended memory, operate ram is 3GB.
6. App version V7.00.006
Note:
- X431 V 8 inch does not do CAN FD and DoIP protocols, check X431 Pro5
- X431 V V4.0 is the latest hardware version currently, and the latest APP version is V5.0
- To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning.
Launch X431 V 8 inch vs. X431 V Pro vs. Oversea Version vs. X431 Pro Mini
icture
|
|
|
|
|
Item
|
|
|
X431 V 8 inch overseas version
|
|
Item No.
|
SP183
|
SP183-D
|
SP167-B
|
SP291
|
Automotive Diagnostics
|
√
|
√
|
√
|
√
|
upgrade
|
√
|
√
|
√
|
√
|
Remote Diagnosis
|
√
|
√
|
√
|
√
|
Recording and playback
|
√
|
√
|
√
|
√
|
special function
|
√
|
√
|
√
|
√
|
Waveform Display
|
√
|
√
|
√
|
√
|
VIN Identification
|
√
|
√
|
√
|
√
|
feedback
|
√
|
√
|
√
|
√
|
Diagnostic Software
|
100, click for software list
|
100, click for software list
|
108, click for software list
|
108, click for software list
|
OS
|
Android
|
Android 4.2
|
Android 4.2
|
Android 5.1
|
SIZE
|
7-inch Tablet,1024X600
|
8” 1280 x 800 IPS display with 189 ppi
|
8 inch Tablet
|
6.9 inch 1280 x 720
|
CPU
|
Dual core 1GHz
|
Quad core 1GHz
|
quad-core 1.3 GHz
|
Quad core 1.3 GHz
|
RAM
|
512MB
|
1 GB
|
1GB
|
2GB
|
Capacity (internal / SD card)
|
2GB
|
16GB (expandable by up to 32 GB)
|
16GB
|
16GB
|
Battery
|
3000mh, rechargeable polymer lithium battery
|
4200mh rechargeable polymer lithium battery
|
4290 mAh
|
3.7V/3000mh rechargeable polymer lithium battery
|
Pixels
|
: 2 mega rear and 0.3 mega front
|
Front-facing 2 MP camera and rear-facing 5 MP camera with 1080p HD video recording
|
Front 2 mp / Back 5mp
|
Front-facing 2MP camera + rear-facing 5MP camera
|
Communication
|
WIFI/Bluetooth
|
Wi-Fi: WLAN 802.11b/g/n Bluetooth: Bluetooth 4.0
|
WiFi/Bluetooth
|
Wi-Fi: WLAN 802.11b/g/n, Bluetooth: Bluetooth 4.1
|
Upgdate
|
one-click update online for 1 year free
|
one-click update online for 1 year free
|
one-click update online for 1 year free
|
one-click update online for 1 year free
|
Launch X431 V 8inch Tablet FAQ:
1. How to save power
Please turn off the screen while X-431 V keeps idle.
Set a shorter standby time.
Decrease the brightness of the screen.
If WLAN connection is not required, please turn it off.
Disable GPS function if GPS service is not in use.
2. What should I do in case I forgot the screen lock
You can set screen lock as pattern or password. If you forgot the password,please consult your device provider or reset your device.
Warning: Resetting may cause data loss. Before use, please make sure important data has been backed up.
3. How to do if the system runs slow
In this case, please do the followings:
> Check all running applications and stop the unnecessary applications (Steps:Settings --> Apps --> Running --> Tap the desired application and then tap
“Stop”).
> Check all installed applications, remove the unnecessary applications (Steps:Settings --> Apps --> Downloaded --> Tap the desired application and then tap “Uninstall”).
If all steps mentioned above are finished and the system still works slowly.Please try to close the system and reboot your X-431 V.
4. How to handle when you encounter “Insufficient storage space”
If this happens while downloading the diagnostic software, please proceed as follows:
1) Get your X-431 V username and password ready. If you forgot the password, please dial our hotline to retrieve it with the product serial number 98549*******.
2) Reset the X-431 V to the default factory settings (For details, please refer to Item 5 in this Chapter).
3) Tap “Settings” --> “WLAN”, choose the desired WLAN network to connect.
4) Open the browser and visit www.dbscar.com to download and install the latest App.
5) After the installation is complete, launch the application and login with your username and password.
6) Tap --> “Update” to download the diagnostic software.
5. How to reset X-431 V
Resetting may cause data loss. Before doing so, please make sure important data and information has been backed up.Do the following to reset X-431 V:
1) Tap “Settings” --> “Back & Reset”;
2) Tap “Factory data reset”;
3) Tap “Reset tablet”;
4) Tap “Clear all data” to start resetting until the tool automatically reboots.
6. Why some videos on the website can be not played
It possibly results from:
1) The current browser does not support Flash playing;
2) Flash player does not support this video.
Try to use other browsers to watch it or install other Flash player
7. The date and time of X-431 V cannot be set.
It is because Automatic date & time is set on your X-431 V. Tap “Settings” -->“Date & time”, deselect “Automatic date & time” and then set the date and time manually.
8.Q:What's X431 V Dealer Code
A: 86A
9.Q: How many car brands can it support
A: It can support for 72kinds of car brands,such as Asian,European and American ect.
10.Q: Which website can I update my machine
A: dbscar.com
11.Q: Why my machine is IP limited
A: Since all of launch original machine,we need to send to launch company for activation,pls send your serial number and your country also your selected language to us,we will help you to activate it. it will take about 2 working day for activation.
Launch X-431 8inch Tablet Vehicle List:
Changan, Daweoo, Huachen, Lexus,Ford, ZhongXing, Bently,Euro Ford,Jatcy,VAZ,Porsche, QIRUI_TY,Maserati,BMW,GM,Seat,Isuzu,Jinlong, USA Ford,X-431 V can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China.
Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Include ABS system, Engine system, SAS system, TPMS system, IMMO system, Battery system, Oil service system, SRS system, etc.
Note: Software with the red font is required to be purchased separately.
Powerful diagnosis Function:
2023 New Added OE-LEVEL Advanced Functions:
- Cylinder Power Balance Testing
- Door and Window Initialization/ Sunroof Initialization
- Transmission Control Module Calibration/ Injector Calibration
- Air Suspension Matching/ Seat Matching
- Basic Functions & Maintenance Services: For all models (chassis) till 2021. Some models for 2021.
- Personalization : For BMW/Porsche/ Toyota/ Subaru
- programmable Module Installation: For Ford/Mazda
- Offline Coding: for Benz/BMW
- Online Parameterization : For Volkswagen/ Audi/ Skoda/ Seat.etc
- Online Calibration : For Volkswagen/ Audi/ Skoda/ Seat.etc
- Online Account Login Service: For Volkswagen/ Audi /Skoda /Seat.etc
1. All System Diagnostic Tool
1) Full Diagnose Function: X431 V can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and Full car systems diagnose make it a professional automotive diagnostic tool
2) Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special Funtion etc.
3) Bidirectional control: Bi-Directional Control which is used to request information or command a module to perform specific tests and functions
4) Actuation Test: it can send information to and receive information from a vehicles control module.
5) Key Programming: if you know you the PIN# of your car, x431 v can match a new key for you .
6) ECU Coding: after replace a new ecu for car, x431 v can help you code it. It is very useful for mechanic.
7) Remote Assistance: launch x431 v support remote diagnosis, if you need help from other mechanic, open the remote control function.
2. Special Functions:
1) Oil Reset Service
This function can be performed in the following cases:
a). If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
b). After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.'
2) Steering Angle Calibration
a). To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.
b). After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing
four-wheel alignment, or recovering car body,you must reset the steering angle.
3) Electronic Parking Brake Reset
a). If the brake pad wears the brake pad sense line, the brake pad sense linesends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
b). Reset must be performed in the following cases:
The brake pad and brake pad wear sensor are replaced.
The brake pad indicator lamp is on.
The brake pad sensor circuit is short, which is recovered.
The servo motor is replaced.
4) ABS Bleeding
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).
a). When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
b). If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
5) Electronic Throttle Position Reset/Learn
This function enables you to initialize the throttle actuators so that the "learned" values stored on ECU are returned to the default state. Doing so can accurately regulate throttle
(or idle engine) operations to control the amount of air intake. Throttle matching must be performed in the following cases:
a) The ECU is replaced and the ECU does not yet store throttle working features.
b)The ECU is disconnected from power and the ECU memory is lost.
c) The throttle assembly is replaced.
d) The intake pipe is replaced or removed, which affects idle speed control by ECU and throttle body.
e) The throttle is cleaned. Although the idle throttle potentiometer features remain unchanged, with the same throttle opening, the air inflow has changed and idle speed control features have changed.
6) Battery Register/Battery Maintenance
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done. Battery matching must be performed in the following cases:
a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information.
If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function,power window without automatic function.
b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an
error message displaying on the instrument panel.
7) Diesel Particulate Filter (DPF) Regeneration
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a) The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced.
c) The fuel additive nozzle is removed or replaced.
d) The catalytic oxidizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is rep
g) Tire Pressure Monitor System Reset
8) Tire Pressure Monitor System Reset:
This function is used to reset the tire pressure sensor. When the car tire air pressure fault indicator is on, after the repair, the tire pressure system needs to be reset by the tire pressure reset function, and the tire pressure fault indicator is extinguished.
9) Gear Learning:
The crankshaft position sensor adaptive learning, the crankshaft position sensor learns the machining error of the crankshaft teeth, and stores it in the computer to more accurately diagnose the engine misfire.
10) Immobilizer Matching:
In order to prevent the car from being used by the illegal key, the car can be opened and used after the anti-theft control system on the car recognizes and authorizes the remote control key through the anti-theft key matching function.
11) Fuel Injector Coding:
This function can write the actual code of the injector or rewrite the code stored in the ECU into the code corresponding to each cylinder nozzle, so as to more accurately control or correct the fuel injection amount of each cylinder.
12)Air Suspension Reset
13)Gearbox Reset
14)Sunroof RESET
15)AFS Reset
16)EGR Reset
3. Other Funtions:
Browser
Built-in Wi-Fi module makes surfing on the internet freely;
Settings
Through the settings, you are allowed to configure the personalized X-431 V;
Search
Enables you to locate your target quickly and conveniently;
Email
Allows you to send and receive email. External POP3 or IMAP email account for some common Web email service provider can be added;
File Manager
You can manage the files or downloaded files stored in SD card efficiently;
Alarm, calendar, calculator etc.
Applications
LAUNCH X431 V 8inch Tablet Specification:
Operating system
|
Android 4.2
|
CPU:
|
Quad core 1.3 GHz
|
Display
|
8” 1280 x 800 IPS display with 189 ppi
|
RAM
|
1 GB
|
Capacity (internal / SD card)
|
16GB (expandable by up to 32 GB)
|
Battery
|
4200mh rechargeable polymer lithium battery
|
Camera
|
Front-facing 2 MP camera and rear-facing 5 MP
camera with 1080p HD video recording
|
Communication
|
Wi-Fi: WLAN 802.11b/g/n
Bluetooth: Bluetooth 4.0
|
Working temperature
|
0℃ ~ 45℃
|
Storage temperature
|
-10℃ ~ 50℃
|
Diagnostic Connector:
Working voltage: 9 ~18V
Average working current: About 35mA
Standby current: About 25mA
Working temperature: -20 to 55℃
Storage temperature: -30 to 70℃
Storage humidity: <80%
Working humidity: <60%
How to connect Launch X431 V8 to Vehicle:
The method used to connect the diagnostic connector to a vehicle’s DLC depends on the vehicle’s configuration as follows:
1)A vehicle equipped with an OBD II management system supplies both communication and 12V power through a standardized DLC.
2)A vehicle not equipped with an OBD II management system supplies communication through a DLC connection, and in some cases supplies 12V power through the cigarette lighter receptacle or a connection to the vehicle battery.
Follow the steps mentioned below to connect OBD II vehicle:
1. Locate vehicle’s DLC socket.
2. Plug the diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD II extension cable to connect the diagnostic connector and DLC socket.).
3. Choose one of the two ways to obtain power from:
a) Power adaptor: Connect one end of the included power adaptor to DC IN port of X-431 V tablet, and the other end to AC outlet.
b) Internal battery pack
For non-OBDII vehicle, proceed as follows:
1. Locate vehicle’s DLC socket.
2. Select the corresponding non-16pin connector.
3. Plug the non-16pin end of the connector into the DLC socket, then connect the other end to the OBD I adaptor, and then tighten the captive screws.
4. Connect the other end of the adaptor to the included diagnostic connector.
5. To supply power to OBD I adaptor from:
a) Cigarette Lighter: Connect one end of the cigarette lighter cable to vehicle’s cigarette lighter receptacle, and the other end to the power jack of OBD I adaptor.
b) Battery Clamps Cable: Connect one end of the battery clamps cable to vehicle’s battery, and the other end to the power jack of OBD I adaptor.
How to Setup Launch X431 V 8 inch tablet WiFi & Bluetooth
Part 1: How to set up Wi-Fi in the Launch X431 V 8inch scan tool
Attention: If you don’t need to use Wi-Fi for a while, you can turn it off to conserve
battery life.
X-431 V has built-in Wi-Fi that can be used to get online. Once you’re online,
you can register your X-431 V, browse the Internet, get apps, send email and
check for software updates.
I. Connect to a Wi-Fi network
1. On the home screen, tap Settings > WLAN.
2. Slide the Wi-Fi switch to ON, X-431 V will start searching for available
wireless networks.
3. Select a wireless network,
– If the chosen network is open, X-431 V will connect automatically;
– If the selected network is encrypted, a network password will need to be
entered.
4. When “Connected” appears, tap the Enter button to exit and return to the home screen.
Note: When Wi-Fi is not required, this should be disabled to conserve battery
Power.
Once it is connected successfully, tap the Wi-Fi network from the list to view its
name, link speed, security type, IP address etc.
When this tool is in range, it will connect to the previously linked network
Automatically.
II. Disconnect from a Wi-Fi network
1. On home screen, tap Settings > WLAN.
2. Tap the network with a Connected status, then tap “Disconnect”
III. Vehicle diagnosis via WiFi
Part 2: How to perform Bluetooth setting in the new LaunchX431 V scan tool
I. Bluetooth setting
Enter X-431 V Bluetooth setting screen (“Settings” –> “Bluetooth”), slide the
Bluetooth switch to ON and X-431 V will start searching available Bluetooth
device, tap the desired connector to pair.
By default, the Bluetooth name is 98549*****00 (where ***** stands for 5 digits.).
Note: In case no Bluetooth setting is done before diagnostic software is launched,
you can also configure it while using the software.
II. Car diagnosis via Bluetooth
Tap –> “Diagnostic” to enter the vehicle selection page.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1). Tap the “DEMO”, the following dialog box appears:
2). Tap “DEMO” to ignore Bluetooth connection and jump to the DEMO system selection screen. (Note: No Bluetooth connection is required for DEMO program.)
3). Tap “Engine”, the system will jump to the function menu.
Read DTC
Read Data Stream
Also, special functions and reset service are available.
Special functions:
Injector test, fuel pump test, purge control solenoid and so on.
Reset service:
Oil Reset Service, Steering Angle Calibration, Electronic Parking Brake Reset, Battery Register / Battery Maintenance, ABS Bleeding, Electronic Throttle Position Reset / Learn, Diesel Particulate Filter (DPF) Regeneration, Tire Pressure Monitor System Reset
Operating system:
Android 7.1
CPU:Quad-core 1.4GHz processor
Memory:2 GB
Storage capacity:16GB
LCD:8 inch capacitive touch screen
LCD resolution:1280×800
Camera:5.0 mega pixels rear camera
Wi-Fi:Support 802.11 b/g/h
Bluetooth:4.0
Working temperature:0℃ ~ 50℃
Storage temperature:-20℃ ~ 70℃
Packing List:
1pc x X-431 v pad computer
1pc x Password envelope
1pc x X-431 v protection sleeve
1pc x DBScar diagnostic connector
1pc x OBD II extension cable
1pc x Cigarette lighter cable
1pc x Power adaptor
1pc x USB data cable
1pc x Non-16pin connector
Shipment Option and Delivery Time In EOBD2shop
1. Shipment from Shenzhen/ Hongkong warehouse 1)DHL Shipping and Other Express Service:- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will help declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 45 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
2)Yanwen Express: - Take About 7-10 working days, No Tax Problem
- Usually No Tax for European Countries or Remote Area. The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries, Like Canada, Germany, Greece, Romania, Sweden, France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us, thank you.
3)Normal Registered Airmail Post way- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
2. UK, US, EU Warehouse Shipping: - Item title marked "Ship from US"
- Take About 3-5 working days, Free TAX, faster shipping with cheaper price.
- Note: If US/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
- We have stocked up hot sale items in US, UK, Amazon US, and EU Warehouse, which is more convenient for you.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
After-sale service:We can offer you lifetime customer service and tech support. If you have any problems, please Provide error image or video to show the problem, and kindly describe it in detail, technician will try their best to help you solve the problem. If there are no solution, you can return it for refund or get a new one for replacement.
For any question, please contact us at: EOBD2shop OBDII tool online supplier- Accepting bulk purchases, We can Offer you wholesale price.
- EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.
Tech support
Launch X431 v 8inch Tablet tech support
Launch X431 v 8inch Tablet software display
Comparison Between Launch X431 V, X431 V+ and X431 Pro Mini
Launch x431 scan tools, which best? Here is a chart of 2017 hot Launch x431 series: Launch x431 v 8 inch tablet, Launch x431 v+, Launch x431 pro mini.
So why do you need a new Launch X431 scan tool the 2017 year?
1- Special functions available
2- Full vehicle coverage: Brazilian, Indian, Chinese Australian, cars…
3- 2017 New vehicle support: BMW
4- 2017 New vehicle support: Toyota
5- VW online programming without German server
Go on your reading for details…
1- 2017 Launch x431 v supports “Special Functions”
The 2017 version of Launch x431 v diagnostic tool 100% works good in special functions, especially perfect in auto key programming.
Special functions incl. Injector test, Fuel pump test, Purge control solenoid, Oil Reset Service , Steering Angle Calibration, Electronic Parking Brake Reset ,
Battery Register / Battery Maintenance , ABS Bleeding , Electronic Throttle Position Reset / Learn , Diesel Particulate Filter (DPF) Regeneration , Tire Pressure Monitor System Reset….
For repairmen working in a garage,
– The most popular functions in a repair garage: All covered!!!!!!
TPMS, Oil, Brake, SAS, Gear Learn & Bleeding….
– Very easy to operate: Click, click…done!
Launch engineers optimize the program;
users just click to finish it and never worry about damage when using
– Low cost: no need buy many repair parts
For example,
TPMS reset is necessary after the tire inflation or tire change; with 2017 version launch x431 v, the car repair shop can earn more, almost no need the cost.
2- Widest vehicle coverage among launch x431 scan tools
The new Launch x431 v 8-inch diagnostic tool has the widest vehicle coverage: up to 93 car brands about 220 car models.
– It can work good on Brazilian, Malaysian, Chinese, India and Australian cars, which almost can not be achieved with old launch 431 v scanners.
There almost no good and reliable diagnostic equipment for cars from Brazil, Chinese, India, Australia, so that the Launch team develops and adds the cars successfully.
– Also, it covers almost full European and USA cars.
Note: car software can be updated for FREE within 2 years.
Usually, what users pay for launch x431 software update is worth a new machine with a bit extra cost. So, the 2-year free update means that the users get 2 machines at a price of 1 machine; that is, save the cost for one machine.
3- X431 V 8.0 inch supports 2017 new BMW cars.
The 8-inch X431 V supports 2017 new vehicles, incl. the 2017 models, such as BMW the 2017 year.
BMW v49.55 software can diagnose the electronic systems of BMW up to 2017, incl. Engine, chassis, body and other parts. The operation is the same as the original scan tool.
More functions are supported, incl. automatically search, manually select, coding program and special functions….
Note: Coding program
The coding program is much easier to operate, compared with the original equipment. Just click on the tablet to finish coding. Repairmen/users can save the training cost, which usually is as several times as the tool.
The BMW coding program interface via Launch x431 v
new x-431 v bmw software features:
– bmw key programming…perfect
cheaper than a professional bmw key programmer
much much easier to program keys than with others
less risk to take
– special functions….ok
tested 100% with oil, tpms, brake, sas, gearlearn & bleeding
– free update with 2 years
4- The new launch can support 2017 Toyota cars.
The 2017 version launch obd2 scan tool is verified to work ok with 2017 Toyota models.
Toyota v48.82 software can diagnose powertrain, chassis and body systems up to 2017 on Toyota vehicles.
Special functions can be available even in the 2017 Toyota.
!!!! Highlight!!!
Module exchange, registration, electric throttle learning… OK for Toyota!
VIN Write..OK
This function will overwrite the following VIN with the new VIN
5- VW online programming: No need the German server
Online function is available through VW V28.0 software running on Launch x431 v 8-inch diagnostic tool:
– No need the German server
– save a lot
– a must for an auto repair shop
– the only tool can realize it
So, here are the TOP 5 reasons of the 2017 Launch x431 v 8-inch obd2 scan tool. Also, there are lots of benefits of it, such as
– 8 inch bigger screen with higher resolution
– reasonable PDA design
– better Bluetooth connector, distance: 10M(Without Obstacle)
– no need activation
– no IP and language limitation
– change the setup language yourself
– fast running speed
….
If you wanna know more about this new x431 v scan tool, you can go to http://www.EOBD2shop.com/wholesale/launch-x431-v-8inch-tablet.html ;all details you want can be found there.
He is the man of his word to trust in you look for.
Launch X431 8" Tablet Software List:
CHANGCHENG
DAEWOO
HUACHEN
LEXUS
AU FORD
ZHONGXING
AUTOSEARCH(AutoSearch)
RESETSAS
BENTLEY
DEMO
EUROFORD
JACTY
VAZ(VAZ)
PORSCHE
QIRUI_TY
RESETBRAKE
ECUAID
MASERATI
RESETGEAR
BMW
GM
SEAT
ISUZU
JINLONG
USAFORD
LANCIA
PEUGEOT
SUZUKI
HM(HM)
RESETOIL
RESETIMMO
MAYBACH
LUXGEN
TOYOTA
VW
CHANGAN
AUDI
CITROEN
HONDA
LANDROVER
LIUWEI_TY
XINKAI
BXFIAT
SMART(SMART)
JPISUZU
KIA
RENAULT
SKODA
SPRINTER
ROVER
WEILI
BUGATTI
RESETTPMS
EOBD2(EOBD)
HAFEI
HAOQING
NISSAN
XIALI
ZHONGSHUN
ROMEO
RESETBMS
AUSTFORD
ACURA
BENZ
CHANGHE
FIAT
MAZDA
ZHONGTAI
JAGUAR
OPEL
ROLLSROYCE
VOLVO
CHRYSLER
DAIHATSU
FLYER
HYUNDAI
BXGM
SUBARU
SSANGYONG
FERRARI
INFINITI
DACIA
MITSUBISHI
SAAB
GAZ(GAZ)
JIAO
RESETBLEED
RESETETS
RESETDPF
AU Holden
MAHINDRA
MARUTI
TATA
PROTON
PERODUA(PERODUA)
Which diagnostic tools is best for Malaysian Car
Proton obdii diagnosis: with Xtuner E3 (Vpecker Easydiag)? Autel MS908? Launch X431 pad?
System |
Xtuner E3 (Vpecker) |
Autel MaxiSys MS908 |
Launch X431 |
Image |
|
|
|
4-sp.auto.trans. TA2000 |
Yes |
No |
Not all |
ABS 9.0 |
Yes |
No |
Yes |
AC3 |
Yes |
Not all |
Yes |
AC6 |
Yes |
Not all |
Not all |
ACU3 |
Yes |
No |
Yes |
Airbag AB 10.0 |
Yes |
No |
Not all |
Airbag AB 2.0 |
Yes |
No |
Not all |
Airbag AB 2.1 |
Yes |
No |
Yes |
BCF Continental |
Yes |
Yes |
Yes |
BOSCH |
Yes |
Not all |
Not all |
Central Electronics CE 3.0 |
Yes |
No |
No |
Central Electronics CE 4.0 |
Yes |
No |
No |
CVT Punch |
Yes |
No |
Not all |
Easy-U 1.0 |
Yes |
No |
Yes |
EMS EasyU IAFM+ 1.0 |
Yes |
No |
Yes |
EMS400 |
Yes |
Not all |
Yes |
EMS700 |
Yes |
Not all |
No |
EMS700 CPS |
No |
Yes |
Not all |
ESP 9.0 |
Yes |
No |
Yes |
ESP TRW EBC450 |
Yes |
Not all |
Yes |
Gearshift Lock 4.0 |
Yes |
No |
Yes |
Instrument cluster PX |
Yes |
No |
No |
MMC |
Yes |
Not all |
Not all |
MMC_EPS |
Yes |
Yes |
No |
MMC_ISO |
Not all |
Not all |
Not all |
Power Window(AS) |
Yes |
No |
Yes |
Power Window(DR) |
Yes |
No |
Yes |
Power Window(RL) |
Yes |
No |
Yes |
Power Window(RR) |
Yes |
No |
Yes |
RENAULT12 |
Yes |
Not all |
Yes |
Renault18 |
Not all |
Not all |
Not all |
Rls |
Yes |
No |
Yes |
Segem S2000 |
Yes |
No |
Not all |
SIEMENS |
Yes |
Not all |
Not all |
SMART II AOTILIV |
Yes |
Yes |
Yes |
SUM OFF |
Yes |
No |
Yes |
TEVES MK20 |
Yes |
Not all |
Not all |
TEVES MK60 |
Yes |
Not all |
Not all |
Transmission(ISO) |
No |
No |
Yes |
Transmission(Mut) |
No |
No |
Yes |
TRW |
Yes |
Not all |
Not all |
Perodua obd2 diagnostics: using Xtuner E3? Autel MS908? Launch X431 scan tool?
System |
Xtuner E3 (Vepecker) |
Autel Maxisys MS908 |
Launch X431 V |
Engine (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
Engine (ED-DE/L201/JUN.04-) |
Yes |
Yes |
No |
Engine (ED-DE/L703/Oct. 03-) |
Yes |
Yes |
No |
Engine (ED-VE/L252/Apr.07-) |
Yes |
No |
No |
Engine (EF-VE/L250/Apr.07-) |
Yes |
No |
No |
Engine (EJ-DE/L701/Aug.01-Oct.03) |
Yes |
Yes |
No |
Engine (EJ-DE/L701/Oct.03-) |
Yes |
Yes |
No |
Engine (EJ-DE/L901/Jun.00-Jun.04) |
Yes |
Yes |
No |
Engine (EJ-DE/L907/Jun.04) |
Yes |
Yes |
No |
Engine (EJ-DE/L251/Apr.07-) |
Yes |
No |
No |
Engine (EJ-DE/L701/Dec.01-) |
Yes |
Yes |
No |
Engine (EJ-DE/L901/Oct.00-) |
Yes |
Yes |
No |
Engine (EJ-VE/M302/May.02-) |
Yes |
Not all |
No |
Engine (HC-E/J100/Aug.98-May.03) |
Yes |
Yes |
No |
Engine (K3-VE/J102/May.03-) |
Yes |
Yes |
No |
Engine (K3-VE/M301/May.05-) |
Yes |
Not all |
No |
A/T (K3-VE/J102/May.03-) |
Yes |
Yes |
No |
A/T (K3-VE/M301/May.05-) |
Yes |
Yes |
No |
ABS (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
ABS (ED-VE/L252/Apr.07-) |
Yes |
No |
No |
ABS (EF-VE/L250/Apr.07-) |
Yes |
No |
No |
ABS (EJ-DE/L251/Apr.07-) |
Yes |
No |
No |
ABS (EJ-VE/M302/May.02-) |
Yes |
No |
No |
ABS (K3-VE/J102/May.03-) |
Yes |
Yes |
No |
Airbag (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
Airbag (ED-VE/L252/Apr.07-) |
Yes |
No |
No |
Airbag (EF-VE/L250/Apr.07-) |
Yes |
No |
No |
Airbag (EJ-DE/L701/Aug.01-Oct.03) |
Yes |
No |
No |
Airbag (EJ-DE/L701/Oct.03-) |
Yes |
No |
No |
Airbag (EJ-DE/L901/Jun.00-Jun.04) |
Yes |
No |
No |
Airbag (EJ-DE/L251/Apr.07-) |
Yes |
No |
No |
Airbag (HC-E/J100/Aug.98-May.03) |
Yes |
No |
No |
Airbag (K3-VE/M301/May.05-) |
Yes |
No |
No |
Chassis/steering (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
Gear Control (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
Gear Control (EJ-DE/L251/Apr.07-) |
Yes |
No |
No |
Gear Control (K3-VE/J102/May.03-) |
Yes |
No |
No |
Gear Control (K3-VE/M301/May.05-) |
Yes |
No |
No |
Immobiliser (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
Immobiliser (EJ-DE/L901/Jun.00-Jun.04) |
Yes |
Not all |
No |
Immobiliser (EJ-DE/L701/Dec.01-) |
Yes |
Yes |
No |
Immobiliser (EJ-DE/L901/Oct.00-) |
Yes |
No |
No |
Immobiliser (EJ-VE/M302/May.02-) |
Yes |
Not all |
No |
Immobiliser (K3-VE/M301/May.05-) |
Yes |
Not all |
No |
SRS (3SZVE/PM2M603/10/2011-) |
Yes |
No |
No |
SRS (K3-VE/J102/May.03-) |
Yes |
Not all |
No |
SRS (EJ-VE/M302/May.02-) |
Yes |
Yes |
No |
SRS (K3-VE/M301/May.05-) |
Yes |
Not all |
No |
In summary, Xtuner E3 scan tool wins, in Malaysian cars diagnostics!
XTUNER E3 Diagnostic System Coverage
ME-Motor electronics, CDI-Common Rail Diesel Injection, ETC-Electronic transmission control, ESM-Electronic selector module, SBC – Sensotronic Brake Control, ESP-Electronic stability program, BAS-Brake assist, Suspension, TPC-Tire pressure monitor, Airbag, CGW-Central gateway, EIS-Electronic ignition switch, OCP-Overhead control panel, UCP-Upper control panel, XALWA-Xenon headlamp, HRA-Headlamp range control, ATA-Anti-theft alarm system, IC-Instrument cluster, ASSYST-Active Service System, SCM-Steering column module, EPS-Electrical power steering, PTS – Parktronic system, EPB-Electric parking brake, COMAND/AUDIO, CD/DVD, TV tuner, CTEL-Cellular telephone, DCM-Door control module, ESA driver-Electric seat adjustment driver, ESA passenger-Electric seat adjustment passenger, AAC-Air conditioning, WSS-Weight sensor system, SVMCM-Special vehicle multifunction control module, etc.
XTUNER E3 WiFi Scanner Function Coverage
Quick Test, Read ECU Info., Read DTCs, Erase DTCs, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Throttle adaptations, Air bleeding, Level calibration, Theft alarm Reset, Key programming, Oil change, Idle speed learning, Idle speed Adjustment, Ignition timing adjustment, Camshaft timing control learning, Maintenance functions, ECU Initial startup, ECU initialization, etc
V 8.0 Launch X431 BMW Support List Free Download
Launch X431 V 8.0 Inch full diagnostic system support BMW diagnostic, coding and programming (ECU programming and key programming) multi-functions, support newer BMW till 2017. Here is the full BMW model, year and modules covered by Launch X431 V 8″ scanner.
https://www.golotool.com/wholesale/launch-x431-v-8inch–full-system-tablet.html
Series:
“1 series-E87/E88
3 serie-E90/E91/E92/E93
X serie-E84
Z serie-E89″
Year:
2005-up
Modules:
SGM-ZGM/KGM/JBE/JBBF [Central Gateway Module(ZGM)]
SRS/SGM-SIM/MRS/ACSM [Safety Information Module(SIM)]
ECM/DME/DDE [Engine Control Module/Digital Diesel Electronics]
AL/AFS/ASA
EKPS [Fuel Pump Control Unit ]
TCM/EGS [Transmission Control Module/Electronic Gearbox Control]
VTG/LMV
ICM
ABS/ACS/DSC
EPS
CAS/FEM
DWA [Theft deterrent system
FZD
IC/IKE/IKI/KOM/KOMBI
PDC [Park Distance Control]
FRM [Footwell Module]
AC/IHKA/IHKR
X serie-E70/E71/E72
2006-
SGM-ZGM/KGM/JBE/JBBF [(ZGM)]
SRS/SGM-SIM/MRS/ACSM [(SIM)]
ECM/DME/DDE
AL/AFS/ASA
EKPS
TCM/EGS
VTG/LMV
ICM
ABS/ACS/DSC
EPS
CAS/FEM
DWA
FZD
IC/IKE/IKI/KOM/KOMBI
PDC
FRM
AC/IHKA/IHKR
MINI-R55/R56/R57/R58/R59/R60/R61
2006-
SGM-ZGM/KGM/JBE/JBBF [(ZGM)]
SRS/SGM-SIM/MRS/ACSM [(SIM)]
ECM/DME/DDE
EKPS
TCM/EGS
ABS/ACS/DSC
EPS
CAS/FEM
DWA
FZD
IC/IKE/IKI/KOM/KOMBI
PDC
FRM
AC/IHKA/IHKR
“5 serie-E60/E61
6 serie-E63/E64″
2002-
SGM-ZGM/KGM/JBE/JBBF [(ZGM)]
SRS/SGM-SIM/MRS/ACSM [(SIM)]
ECM/DME/DDE
AL/AFS/ASA
EKPS
TCM/EGS
VTG/LMV
ICM
ABS/ACS/DSC
EPS
CAS/FEM
DWA
FZD
IC/IKE/IKI/KOM/KOMBI
PDC
FRM
AC/IHKA/IHKR
7 serie-E65/E66
2002-
SGM-ZGM/KGM/JBE/JBBF [(ZGM)]
SRS/SGM-SIM/MRS/ACSM [(SIM)]
ECM/DME/DDE
AL/AFS/ASA
EKPS
TCM/EGS
VTG/LMV
ICM
ABS/ACS/DSC
EPS
CAS/FEM
DWA
FZD
IC/IKE/IKI/KOM/KOMBI
PDC
FRM
AC/IHKA/IHKR
“1 serie-F20/F21
2 serie-F22/F23/F45
3 serie-F30/F31/F35
4 serie-F32/F33/F36
5 serie-F07/F10/F11/F18
6serie-F12/F13
7 serie-F01/F02/F03/F04
X4-F26
X3-F25
X5-F15
X6-F16
MINI-F56″
2010-
CAS
ECM ( – DME/DDE)
ECM2 ( – DME2)
EKPS
TCM ( – EGS)
VTG
GWS
AL
ICM
RDC
ABS ( – DSC)
EPB (- EMF)
EPS
EHC
ICMV
RKVL/EDCSVL
RKVR/EDCSVR
RKHL/EDCSHL
RKHR/EDCSHR
JBE/JBBF
SZL
TRSVC
HKL
ZGM
CVM
PMA
AMP
EMA_LI
EMA_RE
FZD
KAFAS
FLA
ECALL
PDC
CON
FCON
FAH
BFH
HKL
FAS
BFS
AHM
FRM
VDC/VDM
TRSVC2
AC (- IHKA)
AC2 (- IHKA2)
AC3 ( – IHKA3)
ASD
TBX
STML
STMR
LHML
LHMR
“1 serie-F20/F21
2 serie-F22/F23/F45
3 serie-F30/F31/F35
4 serie-F32/F33/F36
5 serie-F07/F10/F11/F18
6 serie-F12/F13
7 serie-F01/F02/F03/F04
X4-F26
X3-F25
X5-F15
X6-F16″
2010-
SRS ( – AIRBAG/SGM-SIM)
4.Firmware update to solve launch x431 error: Err DiagnoseMain ID: -5.
This write-up about Launch X431 V diagnostic firmware update manual will help to solve the error: launch x431 Err DiagnoseMain ID: -5.
Launch x431 error message:
DiagnoseMain Err ID: -5
Failed to obtain firmware information.
Possible reasons:
1 Firmware does not work normally. Please retry after power off and on again
2 Firmware program is abnormal. Please update it
3 Firmware type is incorrect. Please contact the local dealer…
How to solve Launch x431 DiagnoseMain Err ID: -5:
(also How to update Launch x431 firmware
Go to Menu
then Firmware Update
Launch x431 firmware update successfully.
Now the newest x431 v 8 inch firmware version is 11.49.
The x431 launch firmware update guide is for ORIGINAL Launch x431 scan tools at http://www.EOBD2shop.com/wholesale/brand-launch-x431/
Enjoy!