2023 Autel MaxiDAS DS808S-TS TPMS Diagnostic Tool with Complete TPMS Functions Upgraded Of Autel DS808TS/ MP808TS

Product Description

Autel MaxiDAS DS808S-TS, equipped with Full TPMS and Diagnostics, performs well both in your vehicle diagnosis and in Full TPMS. Autel DS808S-TS Scanner is upgraded from MP808S / MP808BT PRO which do not support TPMS functions, thus this scanner has complete TPMS services which same as MS906TS/ MS906Pro-TS / MK906Pro-TS to solve the TPMS issues. If you want a scan tool to meet your diagnostic and TPMS need, then Autel DS808S-TS will be your best choice.

Together with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, MaxiDAS DS808S-TS provides superior special functions, including Oil Reset, EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), and BMS (Battery Management System). In addition to OBDII diagnostics and special functions, DS808S-TS can perform comprehensive TPMS services with ease. Autel MaxiDAS DS808S-TS Functions:

1. OE-Level Full Systems Diagnosis

The full system diagnostics give you a key to access every on-board system to root out those invisible problems such as PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO, etc. The Autel DS808S-TS can read and clear codes on all systems and subsystems so as to present you a clear picture of multiple sensors in different formats. And also it empowers you to read ECU information, live data and conduct active test.

* Read DTCs– It can access to the depth of every onboard systems to read and analysis the DTCs
* Clear DTCs– After tune-up or changing certain components, it can clear the DTCs hidden in the ECU and kill the lights on the dashboard.
* ECU Information– get the retrieved ECU information in detail.
* Live Data Stream– a valuable reference to determine the specific problems accurately.

2. Compelete TPMS Services

Autel DS808S-TS is a perfect combination of Autel MS906 and TS601/ 608 and with same TPMS function as MS906TS. It is specially designed to fix all the TPMS issues, best used for complete TPMS health check, sensor activation, relearn, program, TPMS sensor retrofitting.

1) Activate 99% TPMS Sensors
The Autel DS808S-TS is able to trigger almost all known TPMS Sensors, and works in both 433 & 315 MHz Sensor.

2) Program Autel MX-Sensor
There are 4 ways to Program Autel MX-Sensor: 
Copy by activation, 
Copy by OBD, 
Auto Create, 
Manual Create.
Note: Autel DS808S-TS Can only programming Autel MX-sensors.

3) TPMS Relearn
This function can help your newly replaced TPMS Sensors Work Properly, including OBD Relearn, Automatic Relearn, Stationary Relearn.

4) Advanced TPMS Retrofit
Here are some steps to perform the TPMS Retrofit Functions:
* Backup Data Back up and save the data of the original vehicle
* Code TPMS Encode TPMS with DS808S-TS
* Set up TPMS Set various parameters of TPMS
* Program TPMS Module Program sensor into TPMS Module
* Retrofit TPMS to Vehicle Dashboard Set TPMS parameter to Dashboard panels


3. Digital Inspection with MV108:

This allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, in a safe and quick way.

4. Battery Test with BT506:

To produce a more accurate examination of the battery's cold cranking ability and reserve capacity, which is vital to determining a battery's true health.

5. Maintenance Service

A well-bred horse deserves a good saddle. A real comprehensive OBD diagnostic scanner requires all-in-one functions. DS808S-TS diagnostic tool has been upgraded with over 31 service functions, such as Oil Reset, EPB, BMS, SRS, ABS Bleed, SAS Calibration, DPF Generation, Injector Coding, Throttle Matching, Suspension Matching, TPMS, etc. Moreover, DS808S-TS can be constantly upgraded with more functions to meet your various maintenance needs.

Oil Reset - Reset the oil life system and turn off the oil light after oil or oil filter replacements.
EPB - Reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
BMS - Reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors.、Brake/ABS Bleed: bleed the brake system when the ABS system contains air to restore its braking sensitivity.
DPF - Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
Injector Coding - Write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
SAS Calibration - Calibrate the steering angle after replacing steering related parts.
Suspension Level Calibration - Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
Throttle Adaption - Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
Sunroof Initialization - Initialize the sunroof data to set the sunroof lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
Seats Calibration - Specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.

 

• Whatsapp: +8618054815707
• Email: sales@EOBD2shop.com
• Hot line: +8618054815707
• Skype: careucar

EOBD2shop OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• EOBD2shop is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.