A:Solution:
Download pcmtuner flash 1.2.7 software and activate it again.

A:They both are good tools but in different ways. PCMtuner has a lot of obd modules for Asian etc, but cannot do any BDM Jtag work or Agri and plant like KT200.
KT200 has more new protocols and with the possibility of reading TCUs than pcm. But it does not have tuner account and tuning service for tuners.
pcm tuner has better technical support and no annual fee. kt200 uses an annual subscription model for updates.
Each tool has their own capabilities, no all tools can do read/write perfectly. Buy both, PCMtuner has very good coverage but can only do certain bench jobs (edc17/med17/mev17) and limited boot. It depends on your needs, no one tool is ever enough. The 2 machines are complemented. The more tools, the more work you can perform.

A:Solution:
Try module
module 59: 1.2T EMS3155 UDS (TC1782/2.5MB) or
module 22: Nissan: Juke 1.2T EMS3155 (TC1782/2560KB)

you can try, UDS requires immobiliser authorization on many ECU so cannot do bench
just read it in obd with pcm tuner… not start in bench because immo active and key.

A:Solution:
You just installed pcmtuner flash, you need to install the complete pcmtuner package, download the PCM Suite package from tuner-box.com.
Follow installation here to set up PCM Suite.

A:Solution:
If trying to read an Opel vectra edc16 which is not supported, you’ve probably done damage to your pcmtuner hardware depending on how you connected to the ecu.
Opel edc16c39 is not supported in pcm flash models.
You can read this ecu with the Fetrotech tool plugin.
Always check pcmtuner supported module list before operation.

A:
The black box tool has pcmtuner port, it can be used standalone or use with pcmtuner.
The silver box can only be used with pcmtuner.

A:The black Fetrotech tool is used as a standalone module, i.e. you can use on its own with a dedicated pc, the silver one works in conjunction with pcmtuner.

A:Download and install pcmtuner app you will have vr files.