A:Solution:
Autel KM100 will not generate Xhorse chips or KEYDY directly.
To generate xhorse xt27 super chip with KM100, you need to generate xt27 to Hitag-2 blank chip. Then move xt27 to Autel KM100 and you can generate it as other chips, i.e ID48 Megamos.
1. First I need to generate Xhorse XT27 superchip on Xhorse VVDI Key Tool, like Htag-2?
2. And after this i need to move XT27 to Autel KT100 and i can generate it as ID48-Megamos for example?

Xhorse does not generate Keydy chips or vice versa.

A:OnlyVVDI Super Chip XT27Bchips could be set as MQB.
How to set Super chip XT27B as MQB chip withvvdi key tool plus
Go to Special Function-> Set type of VVDI Super Chip-> Set as MQB

A:Solution:
Use ID46 PCF7936. Same as Honda Civic 2006-2011
Generate transponder, pcf7936, New 7936. Works perfectly, just used it for a 2010 Civic AKL job, both the flip and spare key work fine.

A:

Solution:

It is an ID33 rolling and can’t be cloned. It will clone successfully but won’t start the vehicle more than once. It’s a rolling code transponder.

It works on Renault and other mid-range vehicles, but it doesn’t work on Mercedes because it’s a rolling code, it only turns on once and then it doesn’t function anymore.
You can’t generate those chips with the majority of the programs, only tango original,kr55 or avdi original. If you don’t have it you can’t get it done, and it’s an EEPROM job the mcu has to be desoldered.
Take out immo read with programming tool (best desolder MCU ) generate chip with and key tool ( even Gambit can do the chip by dump ) tango, zedbull , anything that makes old mercedes with id33.
The process is simple to ews keys for BMW.

Kr55 best one tool for whole job if you have it.